Do You Know Safe Operation Steps Of Lipstick Filling Machine?

Here is a professional Automatic Labeling Machine Manufacturer talking about safe operation steps of lipstick filling machine.

If you need any information about 20 Liter Tank Lipstick Filling Machine, feel free to contact us.

20 Liter Tank Lipstick Filling Machine

Normal service life. Therefore, we safely operate the automatic lipstick filling machine. It is also a good idea. According to these matters that should be noted, not only can we bring high-efficiency production, but also reduce the occurrence of operational failures. How does the lipstick filling machine operate safely? What are the tricks in the operation? Using these coups can increase the productivity of your business by several times and reduce the occurrence of lipstick filling machine failures. Here is a summary of these coups for everyone.

1. Before starting the machine, check whether the power and air pressure of the automatic lipstick filling machine are normal; check whether the solenoid valves and cylinders are good by manual method; whether the action is normal; whether the pumps are turning correctly; whether the air is exhausted. If abnormal conditions are found, the production can be carried out after troubleshooting.

2. The automatic lipstick filling machine automatically performs flushing, disinfection, filling, capping and glanding during production, without human disturbance, but the operator should closely observe the status of each part, find the problem, and automatically hit the manual in time. Prevent accidents. When the chain is not in the right position, manually push the spindle out and then push the chain to the normal position. The disinfectant should be replenished in time to prevent the pump from idling in the waterless state and burn out the seal.

3. After the production of the automatic lipstick filling machine is finished, the residual liquid in the pipeline should be drained, the gas path and water source should be cut off, and the power supply should be turned off.

4. Daily maintenance: We must regularly check some parts and check them regularly. Check the parts of the automatic lipstick filling machine: worm gear, worm, bolts on the lubrication block, bearings and other moving parts, to see if these parts are flexible and wearable, and find defects should be repaired in time, and should not be used barely.

5. Automatic lipstick filling machine should choose dry and clean indoor use, try not to use the acid in the atmosphere and other places where the body is corrosive gas circulation. After use, it should be cleaned and then installed to prepare for the next use.

6. If the packaging machine equipment is not used for a long time, the full-automatic lipstick filling machine must be cleaned. The smooth surface of the machine parts is coated with anti-rust oil and covered with a cloth. If the device is not used for a long time, it must be checked whether the parts are normal before use.

The above is a summary of the safe operation of the lipstick filling machine. You can refer to it when using the lipstick filling machine.

We can do Customized Stainless Steel Storage Tank. If you have any questions, welcome to contact us.